Confined Space Rescue Tripod and Winch Equipment

Fireman fire safety fire rescue tripod with CE standard Brief: * Item name: rescue tripod * Material is High strength Aluminum * 134-214cm working scope * 134cm Closed Height Specifications: * Max. Opening Distance of Blades > 28mm * Rated Working pressure :63Mpa * High quality and using long...
  • Confined Space Rescue Tripod and Winch Equipment

    Brief:
    * Item name: rescue tripod
    * Material is High strength Aluminum
    * 134-214cm  working scope
    * 134cm Closed Height

    Specifications:
    * Max. Opening Distance of Blades > 28mm
    * Rated Working pressure :63Mpa
    * High quality and using long time


    Relative datas:

    Technical Specification




               Rescue
               Tripod

    Model

    MT-FT1

    Material

    High strength Aluminum

    Operating Load

    300Kg

    Breaking Force

    22KN(Steel wire Rope)

    Working Scope

    134-214cm

    Closed Height

    134cm

    Extend Height

    214cm

    Dimension for reference

    173*39*36cm

    Weight

    16.5Kg

    Winch

    Length of Wire

    25m

    Operating Load

    200Kg

    Breaking Force

    1800KN


    Working Principle
    MT-FT1 rescue tripod is the rescue tool specialized to used to prevent dropping from high place.
    It has passed the EN795 inspection. It confirm to the B level standard.
    It only can one person use.


    Main Structure
    The structure of MT-FT1 rescue tripod is shown as Pic #1.

    24.png

    Pic # 1. Structure of MT-FT1 Rescue Tripod
    * The top head
    * Eyebolt
    * Fastening handle
    * Pulley
    * Outer tube of the frame
    * Handle control capstan
    * Positioning pin
    * Hook
    * Branch sleeve
    * Chain-guard
    * Working height: extension height: 214cm  Closed height: 134cm


    Basic Configuration
    * The top head: High strength Aluminum.
    * Eyebolt: one is in the center, one is in the back, it's convenient to install equipment.
    * Frame: extension type frame equipped with propel rod, it can push the frame up and down. The bottom of the frame equipped steel support. Effective guarantee the equipment can use on the uneven ground.
    * Handle control capstan: 30 meters steel wire.
    * Chain: Safety chain can effectively reduce the horizontal force,prevent frame slide.


    Specification

    Technical Data of Rescue Tripod

    Model

    MT-FT1

    Material

    High strength aluminum material

    Operating load

    200kg

    Max. Prevent breaking force

    22KN (Steel Wire Rope)

    Height scope

    134-214cm

    Working height

    Closed height

    134cm

    Extension height

    214cm

    Packing Dimension

    153*39*39cm

    Weight

    36kg

    Technical Data of Rescue Tripod

    Model

    MT-FT1

    Operating Process

    Fix The Tripod
    * Let the tripod keep flatting on the smooth and hard ground. Open the frame, use the positing pin to fix the length of tripod.

    Set up the tripod, and fixed by bolt-locking.
    25.png

    Confirm Branch sleeve is steedy. Adjust telescopic frame to ensure that the three fulcrum in the same plane. To install the chain and lock the chain by the connection button.
    Notes: don't stumble by the chain when install and use the chain.
    23.png

    Inspect if the positing pin is firm and if the position is right.

    Confirm the chain install the bottom of the frame, and let it effectively prevent slipping caused by the horizontal force.

    26.png

    Pack up The Tripod
    * Press the lever connect with the lock, and contraction the frame.
    * Put the tripod lie flat on the surface, remove the positioning pin, then pack up the frame.
    * The rescue tripod must retract immediately after using, and as the manufacture request to inspect the equipment.
    * Can be inspected by the person:
    ----Manufacture.
    ----The person who are recommend by the manufacture.
    ----The company which is recommend by the manufacture.
    This inspection is valid before next inspection when it needed.